humiFog (SL) NA
humiFog for direct humidification in the room is an adiabatic system that atomises the water directly into the environment being humidified. Another important application is adiabatic cooling: a 100 kg/h humiFog can cool the air with an equivalent cooling capacity of 70 kW, with an energy consumption of just 955 W.
Thanks to the low energy consumption, the large capacity, and the low maintenance, humiFog is the ideal solution for direct humidification in rooms.
The main components of the humidification system are:
• pump assembly;
• water distribution and atomisation system:
- distributors in the room;
- solenoid valves;
- connection pipes and fittings;
• water treatment system (reverse osmosis), not supplied by CAREL.
Pump assembly for direct humidification in the room
The pump assembly used for direct humidification in rooms has a constant speed volumetric pump that pressurises the water to 70 bar.
A special regulating valve is used to maintain the pressure constant as the water flow-rate delivered by the pump assembly changes.
The built-in controller completely manages the operation of the unit, using water pressure (in and out), temperature, conductivity sensors, etc.
In addition, it can independently control the humidity of the air in the room by simply connecting an external humidity probe. Alternatively, it can be controlled by a signal coming from an external control system.
The capacity is controlled directly by the humiFog unit, with stepped modulation. The pump assemblies are available with various maximum capacities, 60, 120, 180, 250, 350, 500 kg/h (custom versions up to 5000 kg/h).
A pump assembly is also available with multiple distribution systems located in different rooms: in this case, the pump assembly acts simply as a generator of water at constant pressure, while the distribution systems in the various rooms are managed by external controllers.
Independently of the distribution system used, the water is always delivered at constant pressure, 70 bar, to ensure that the nozzles always produce very fine droplets, with an average diameter of 10 to 15 µm, that are quickly absorbed by the air.
The nozzles are available with capacities of 1.45 kg/h, 2.8 kg/h and 4 kg/h at 70 bar.
This consists of stainless steel manifolds (pipes) with nozzles that are installed inside the room being humidified/cooled. The manifolds are available in various models, to fit nozzles from one side only or on two opposing sides. A series of manifolds make up a line in the distribution system.
Ventilated room distributor
This consists of a tangential fan located behind a manifold (pipe) with nozzles. The tangential fan generates a flow of air that assists the evaporation of the droplets and the sustains the droplets with a cushion of air, so as to produce an essentially horizontal trajectory. The ventilated distributors have capacities that reach 32 kg/h in just 1.5 m in length!
The ventilated distributors can be connected in series to make up a distribution line.
Capacity control and drain solenoid valves
Each distribution line, with or without ventilated distributors, can be connected directly to the pump assembly or shutoff by a solenoid valve. By controlling these solenoid valves, humiFog manages the capacity of the distribution system, thus obtaining stepped modulation in the capacity (up to 4 steps). Each line has a drain valve that is mainly used to quickly discharge the water pressure when the line stops atomising: when opening the drain valve, the pressure quickly drops from 70 to 0 bar and the line is emptied, preventing the nozzles from dripping.
In addition, the drain valves are used for the periodical automatic washing cycles managed by humiFog. The main drain valve, installed at the lowest point in the installation, is also managed by humiFog.
Connection pipes and fittings
CAREL provides hoses or stainless steel pipes and compression fittings suitable for pressures of up to 100 bar.
Observations on installation
humiFog is the ideal system for direct humidification into rooms because, by maintaining the water pressure constantly at 70 bar, it generates very fine droplets with an average diameter of 10 to 15 µm that are quickly absorbed by the air, humidifying and cooling it.
Each nozzle creates a cone of droplets that requires a certain time and distance to be completely evaporated.
This depends on the air conditions: for example, at 20 °C and 50% rH and with no air flow, the droplets will have a parabolic trajectory that will cause some of the droplets to carry up to 2.5 m horizontally and 4 m in height.
This clearly means there are limits in the installation to prevent the droplets from wetting objects, machinery and people in the room.
When these limits are not satisfied, use the ventilated distributors that, due to the cushion of air generated by the built-in tangential fan, carry the droplets of water in a substantially horizontal trajectory.
Special attention has been paid to the hygiene aspects of the humiFog.
The built-in controller automatically manages the following operations:
• fills the lines only when humidification is required;
• empties the lines when no humidification is required;
• automatically washes the lines at periodical intervals, when no humidification is required for an extended period.
This all ensures high hygiene standards, without requiring manual washing and/or emptying procedures
• printing industry;
• textiles industry;
• timber industry;
• fruit/vegetable cold stores;
• paper, timber stores, etc.
• industrial, especially in the textiles industry;
• outdoor cooling.
* Entries are ordered by date
Code Description Language Date * Release Code +030220562 Description humiFog: ricambi / spare parts Language ENG ITA Date 31/03/2009 Release 1.2 Code +030220485 Description Service Umidificazione umidifi catori isotermici e adiabatici Language ITA Date 01/09/2008 Release 1.0 Code +030220480 Description MasterAria: controllore elettronico Language ITA Date 12/11/2007 Release 1.0 Code +030220481 Description MasterAria: electronic controller Language ENG Date 12/11/2007 Release 1.0 Code +030220563 Description humiFog: pumping system Language ENG Date 29/06/2007 Release 1.1 Code +030220560 Description humiFog: stazione di pompaggio Language ITA Date 29/06/2007 Release 1.1 Code +030220561 Description humiFog: sistemi di distribuzione/ distribution systems Language ENG ITA Date 07/04/2006 Release 1.0
* Entries are ordered by date
Code Description Language Date * Release Code +4000008IT Description Umidificazione precisa per una stampa di qualità Language ITA Date 18/01/2011 Release 1.0 Code +4000008EN Description Precise humidification for quality printing Language ENG Date 18/01/2011 Release 1.0 Code +402200260 Description Umidificazione in tortellificio DALÌ - ITALIA Humidification at the DALÌ fresh pasta factory - ITALY Language ENG ITA Date 10/12/2008 Release 1.0 Code +40C200260 Description DALI意式面食工厂加湿系统—意大利 Language CHI Date 10/12/2008 Release 1.0 Code +402200240 Description Umidificatore ad acqua in pressione in BDN - Wykroty - POLONIA High pressure water humidifier in BDN - Wykroty - POLONIA Hoge druk verneveling in BDN - Wykroty - Polen Language DUT ENG ITA Date 03/11/2008 Release 1.0 Code +40C200240 Description 波兰-Wykroty-BDN的高压水加湿器 Language CHI Date 03/11/2008 Release 1.0 Code +402200020 Description humiFog at the HSBC bank Language ENG ITA Date 04/09/2007 Release 2.0 Code +402200170 Description Umidificazione di una fabbrica tessile/ Humidification of a textiles factory Language ENG ITA Date 02/09/2007 Release 1.0 Code +402200100 Description Adiabatic humidification system applied to a manufactory producing aluminium packaging Language ENG ITA Date 01/03/2006 Release 1.0
* Entries are ordered by date
Code Description Language Date * Release Code +3000018FR Description L’humidité est importante! Les humidificateurs CAREL, une solution pour chaque application Language FRE Date 15/09/2020 Release 4.1 Code +3000054ZH Description 数据中心节能解决方案 Language CHI Date 11/10/2016 Release 2.0 Code +3000054DE Description Energiesparlösungen für Rechenzentren Language GER Date 11/10/2016 Release 2.0 Code +3000054EN Description Energy saving solutions for data centers Language ENG Date 11/10/2016 Release 2.0 Code +3000018ZH Description 湿度问题! CAREL解决方案 满足您的加湿需求 Language CHI Date 19/02/2015 Release 3.0 Code +3000007AR Description HUMIFOG MULTIZONE Language ARA Date 02/02/2015 Release 2.0 Code +3000018CS Description Na vlhkosti záleží! CAREL - řešení Vašich potřeb zvlhčování Language CZE Date 01/10/2012 Release 2.0 Code +3000018FI Description Kosteudella on merkitystä! CAREL kostuttimet, ratkaisu kostutustarpeisiin. Language FIN Date 01/10/2012 Release 2.0 Code +30U0018EN Description Humidity matters! CAREL solutions for your humidification needs ( USA) Language ENG Date 01/10/2012 Release 2.0 Code +302240671 Description Wine industry Temperature and humidity control systems Language ENG Date 28/05/2009 Release 1.0 Code +302240670 Description Industria del vino Sistemi per il controllo di temperatura e umidità Language ITA Date 28/05/2009 Release 1.0 Code +030220486 Description Service humidification Isothermal and adiabatic humidifi ers Language ENG Date 01/09/2008 Release 1.0 Code +30C240551 Description 印刷应用领域 的湿度控制 Language CHI Date 27/05/2008 Release 1.0 Code +302240553 Description Die Regelung der Luftfeuchte in Druckereien Language GER Date 27/05/2008 Release 1.0 Code +302240552 Description Le contrôle de l’humidité dans l’imprimerie Language FRE Date 27/05/2008 Release 1.0 Code +302240551 Description Humidity control in printing applications Language ENG Date 27/05/2008 Release 1.0 Code +302240550 Description Il controllo dell’umidità nell’industria della stampa Language ITA Date 27/05/2008 Release 1.0 Code +302235438 Description Die Regelung der Feuchtigkeit in der Textilverarbeitung Language GER Date 02/07/2007 Release 1.0 Code +302235434 Description Luchtvochtigheid in de textielindustrie Language DUT Date 02/07/2007 Release 1.0 Code +302235437 Description Le contrôle de l’humidité pour l’industrie textile Language FRE Date 02/07/2007 Release 1.0 Code +302235436 Description Humidity control in textile applications Language ENG Date 02/07/2007 Release 1.0 Code +302235435 Description Il controllo dell’umidità nelle applicazioni tessili Language ITA Date 02/07/2007 Release 1.0 Code +302238281 Description Integral control solution Air Handling Units Language ENG Date 03/10/2005 Release 3.0 Code +30C238281 Description 空气处理机组 的整体控制方案 Language CHI Date 03/10/2005 Release 3.0